195News

ampliFI logo
NAPERVILLE, Ill. – October 25, 2022 – (Newswire.com)

…

Hemisphere GNSS, Inc. announces the release of the GradeMetrix® Scraper Solution for pull pan and belly pan scrapers.

MUNICH …

Variphy Logo Variphy
LAFAYETTE, Calif. – October 25, 2022 – (Newswire.com)

…

Transformational Leader Recognized by Top Community in Health and Wellness

TAMPA, Fla. – October 25, 202…

BOXBOROUGH, Mass. – October 25, 2022 – (Newswire.com)

SynQor, Inc., announces its new military grade, 3-Phase AC or 270 Vdc input Power Conditioner module (MIPC). The unit’s flexible input, wide frequency range and specification compliance allows it to operate in aircraft applications seamlessly. The MIPC can draw balanced input currents within ±1% from a 3-Phase 115 Vrms Line-to-Neutral source or be powered from a 270 Vdc source and deliver 1.5 kW at 270 Vdc. The power conversion efficiency of this compact, full-brick-size module is as high as 95.4%. This brick can deliver full power over a wide baseplate temperature range (-55°C to 100°C). Up to 10 units can be connected in parallel for higher power.

The MIPC is designed to meet MIL-STD-704 (leading power factor), MIL-STD-461 (C-F), MIL-STD-1399, and MIL-STD-810G. The MIPC has superb Total Harmonic Distortion of less than 3% at output power levels above 650 W. The 115 Vrms “Delta” input connected PFC can operate at frequencies from 0 Hz to 800 Hz (at 0 Hz, a 180 to 297 Vdc input voltage is expected). This ruggedized, military-grade component is designed to meet shock, vibration and environmental conditions as specified by MIL-STD-810G. 

The MIPC includes a variety of status signals, an RS-232 serial interface, an output ‘MIPC Enable’ control pin, and a ‘Battle-Short’ pin. The module provides the AC_GOOD and DC_GOOD control signals, allowing designers to evaluate the unit’s status quickly. Detailed statistics of the converter can be accessed through a 9,600 baud serial interface. The module’s output may also be enabled or disabled through the ‘MIPC Enable’ pin. The unit has a ‘Battle Short’ pin that allows users to override potential shutdowns due to an over-temperature or input phase drop event. SynQor’s products have a proven record of satisfying and often exceeding military specifications to deliver the most efficient and dependable solutions in the market.

Features

• 3-Phase 115 Vrms Line-to-Neutral or 180-297 Vdc input
• Balanced load currents for 3-Phase sources
• 1.5 kW 270 Vdc non-isolated output
• High Efficiency 95.4%
• Power Factor > 0.98 at 400 Hz 1.5 kW
• Total Harmonic Distortion

Specification Compliance

• MIL-STD-704(A-F)
• MIL-STD-461(C-F)
• MIL-STD-1399-300B
• MIL-STD-810G

Please download the MIPC-270-115-270-FP datasheet. For more information on this or additional power application assistance, please explore www.synqor.com or contact your local SynQor representative.

About SynQor: Located in Boxborough, MA, USA, SynQor is a leading supplier of power conversion solutions to the military, avionics, transportation, medical, industrial, telecommunications and computing markets. SynQor’s innovative products are designed to exceed the demanding performance, quality, and reliability requirements of today’s power electronic engineers who develop leading-edge infrastructure hardware. SynQor provides all the power conversion modules needed to build a power system, and we also provide complete power systems. SynQor’s capabilities include standard and custom solutions, and we deliver them with industry-leading service and support. SynQor’s total commitment to quality, customer satisfaction, and continuous improvement drive our business processes.

Contact Information:

Caroline Lussier

Marketing Manager

[email protected]

978-849-0600

Press Release Service
by
Newswire.com

Original Source:

SynQor® Releases a Military Grade 3-Phase AC or 270 Vdc Input Power Conditioner Module (MIPC-270-115-270-FP)

RICHMOND, Va. – October 25, 2022 – (Newswire.com)

One of the most iconic and recognized Mexican wrestlers, Blue Demon will be present as a Magic Sun Farms’ brand ambassador during the Global Produce & Floral Show organized by the International Fresh Produce Association and the Produce Marketing Association. The fighter will be present at the Magic Sun Farms booth (#5475) on Oct. 28 from 1-4 p.m. and on Oct. 29 from 12-2 p.m. taking photos with attendees and signing autographs.

Blue Demon undoubtedly embodies the company’s values: giving the best results in the face of adversity and offering the highest quality standards. 

Over the last 14 years, Magic Sun has expanded its growing and research operations to more than 211 acres in Mexico. The company is a pioneer in the use of high-tech greenhouses to offer optimal light conditions and mild weather to develop a year-round supply for a variety of tomatoes with the best quality and flavor.

While using cutting-edge technologies, Magic Sun combines the best of nature with the best of sophisticated systems in greenhouses: engineers rely heavily on bees that pollinate plants in promoting a healthy growing environment and eco-friendly system. 

Magic Sun stands out for having its own university (Ceickor University) from which engineers in organic greenhouse agriculture graduate, preparing leaders with a high technological profile.

Some of the key technologies through which Magic Sun guarantees the quality of its products are Integrated Pest Management (proactive protocols to monitor ecosystems and introduce beneficial insects to prey on bugs that damage crops); Efficient Land Use (maximize environmental acreage and highly density plantings with nutrients applied directly to the roots to yield up to 4x more production than conventional farming); and Sophisticated Irrigation Systems (recycling program monitors water absorption to optimize growing conditions to ensure 20x less water used).

 “Over the years, the success of this company has been guided by our commitment to leverage our growers’ expertise, our vision to locate produce greenhouses in key optimal agricultural regions, and applying painstaking attention to product quality. Our dream is to deliver the most awesome flavors to consumers,” said Gerardo Lopez, CEO of Magic Sun. 

With an exponential growth across the U.S., Magic Sun’s team offers the full range of support services to bring fresh-grown products to consumers through its nationwide network of distributors and retail partners. 

About Magic Sun

Magic Sun is a leading hydroponic grower with greenhouses covering over 211 acres of production in Mexico and with presence across the U.S. We produce the healthiest, most flavorful tomatoes, blueberries and bell peppers. We are all about combining the best that Mother Nature offers with emerging new technologies to grow the absolute best products.

Contact Information:

Laura Huerta

Marketing Manager

[email protected]

(804) 918-1781

Related Files
Magic Sun Farms joins Blue Demon to fight for the organic tomatoes US market.docx

Press Release Service
by
Newswire.com

Original Source:

Magic Sun Farms Joins Blue Demon to Fight for the Organic Tomatoes US Market

ElectricRates.com podcast, Electric Rates Customer Experience, delivers a way for customers to be heard during a time when they are experiencing the highest electricity prices in history.

…

New enhancements add multi-cluster cost monitoring and reporting to Fairwinds Insights

BOSTON – Oc…

Giatec exhibits at Bauma 2022 in Munich, Germany, to cement the Heidelberg Materials partnership with enhanced global development

Giatec\u00ae Laun…

The world’s leading provider of quality, scalable and affordable 3D content focuses on its mission of enabling 3D transformation at any scale for modern commerce and virtual worlds.

ORLANDO, Fla. – October 25, 2022 – (Newswire.com)

CGTrader, the world’s leading provider of 3D content, announces the rebranding of its custom 3D modeling platform from ARsenal to Modelry. The name change reflects the platform’s central purpose of empowering businesses to utilize 3D model content essential for modern commerce and the virtual and gaming worlds. 

“Modelry represents our mission to accelerate commerce growth through affordable, scalable, and quality 3D model production,” said Dalia Lasaite, CEO and co-founder of CGTrader.

“The internet is becoming more immersive, businesses are building out digital twins, and it is clear that how we interact will be in metaverses and virtual worlds,” Lasaite added. “At the core of these experiences are 3D models, and we are committed to creating and providing top-quality, custom 3D & AR models at scale.”

The Modelry platform allows clients to access 3D model creation at scale, easily rendering products and bringing them to life in 3D and AR. The process is quick and straightforward: users take reference photos on a camera or smartphone, upload them to the Modelry platform, and from there, Modelry creators produce the assets in a quick and seamless timeline. The platform’s automated and tailored quality assurance process enables clients to achieve the best results at any scope or scale.

“By eliminating the friction from entering the 3D creation space, we are providing brands the opportunity to gain and maintain relevance in a crowded marketplace,” Lasaite said. “Providing an immersive shopping experience increases a brand’s chances at converting shoppers into customers. People are looking for a store-like experience online, and through Modelry, we can help businesses tap into that space.”

Modelry is powered by CGTrader’s Marketplace, which is trusted by over 150 Fortune 500 companies to source and manage their 3D content.

To learn more about Modelry, please visit Modelry.ai.

About CGTrader

Established in 2011, CGTrader is the world’s leading provider of 3D content. More than 500,000 customers globally, including more than 150 Fortune 500 enterprises, trust CGTrader to source and manage three-dimensional content. The company has two core product lines: Marketplace, which unites over 6 million professional 3D designers, and Modelry, the secret engine to the global 3D transformation.

Contact Information:

Madeleine Moench

[email protected]

Press Release Service
by
Newswire.com

Original Source:

CGTrader Announces Rebrand of Its Custom 3D Modeling Engine from ARsenal to Modelry